POLIPROPYLENE DUNNAGE AIR BAGS LEVEL 1
29 August 2022
ONE WAY WOVEN LASHINGS
30 August 2022
HPHDRS coil lifting slings are high performance slings (i.e. made of HMPE polyethylene fibre) covered by an additional HDT sleeve in ultra cut-resistant Dyneema®. The HDT sleeve is fixed to the sling by means of a strap that passes around the eyelets. In this way, the sleeve is always taut along the sling, protecting it from the risk of cutting along its entire length, avoiding it from curling up and leaving some parts exposed.
Designed for basket lifting of jumbo coils and, in general, for loads where there is a high risk of cutting (metals, stone, concrete, glass, heavy carpentry).
■ HPRS load-bearing sling made of 100% HMPE.
■ WLL up to 50 t (safety factor 7:1).
■ Compliant with EN1492-1.
Dyneema® is a registered trademark of Royal DSM N.V.
■ Robust and flexible textile structure: adapts perfectly to the shape of the load.
■ Maximum protection against sharp edges.
■ Excellent tear resistance when subjected to high pressure.
■ Very high load capacity (15 times higher than steel).
■ Minimum elongation (0.5% of WLL).
■ Very low weight (10 times lower than steel).
■ Superior quality materials.
■ Possibility of applying NFC-RFID microchips (Tech for Safety).
■ Possibility of repairing damaged slings.
■ Possibility of replacing the HDT sleeve only.
■ It does not absorb humidity.
■ Long life cycle.
■ 100% HMPE fiber both in the core and in the cover sleeve.
■ Ultra-compact sleeve, resistant to wear and abrasion.
■ 100% Dyneema® HDT sleeve ultra-cut resistant.
■ WLL up to 50 ton.
■ Min elongation at WLL (0,5%).
■ Safety Factor 7:1.
■ Min Length = 1 m.
■ MAX Length = 20 m.
■ Working temperature: -40°C +70°C.
■ Floats on water (specific weight = 0.97 g / cm3).
■ Excellent resistance to chemical agents.
■ Excellent resistance to UV rays.
■ Compliant with: DM2006/42/CE, EN1492-2.
Before using the products, carefully read the instructions for safe use.
For further information, please contact us: our sales technicians will indicate the most suitable products for your applications.
According to EN-1492-1:2000+A1:2008 (C.3.6 e D.3.7), slings should be protected from edges, friction and abrasion, whether from the load or the lifting appliance (shackles, hooks, lifting points). Where protection against damage from edge and / or abrasion s supplied as a part of the sling, this should be correctly positioned.
WARNING
Damaged or bad used protections compromise the safety in lifting operations.
■ Inspect before use for cuts and tears.
■ Prevent protection and sling from slipping or sliding across load edge.
For further information, please contact us: our sales technicians will indicate you the most suitable products for your applications.
